Joined: 29 Dec 2008 Posts: 214 Location: Lower Brackley on the Chesapeake
Posted: Fri Feb 20, 2009 23:41 Post subject:
bddognobone wrote:
Holy crap?
I flashed one of my WRT600N routers with the STD version made for WRT600N's and... Power LED no longer blinks?!?!?!?
I can't select anything but Auto for my 5GHz band channel which is weird, but I'm connected at 270, and my power light is no longer blinking... I'll take that trade off.
I'll flash my second one and make sure I didn't break something on my first one before I'm 100% sure it fixes the LED blinking... But so far I'm pretty hopeful.
Has anyone else flashed with this exact one on a WRT600N or is everyone using just the generic standard on them?
That's encouraging, I've got 11650 Eko Std nokaid usb on mine.
I have channel selections options on 2.4 and 5, if i use auto on the 5 I get 135mp connection if I use a specific channel I get 270 this is using NA Only.
Do you have selectable 2.4 Ghz channels wide 40Mhz N only _________________ Shad
-----
Linksys WRT600Nv1.1 v24-sp2 11667 BS std
Linksys WRT350Nv1 11650M NEWD Eko std
Linksys WRT300Nv1 11650M NEWD Eko std
Netgear WNR834bv2 v24-sp2 build 11667 BS mini
Linksys NSLU2 Unslung
That's encouraging, I've got 11650 Eko Std nokaid usb on mine.
I have channel selections options on 2.4 and 5, if i use auto on the 5 I get 135mp connection if I use a specific channel I get 270 this is using NA Only.
I've played with it more, I only get channel selections in NA-Only, not N-Only with the 5GHz. With 2.4 I can only select and save channels if I select a band (20 or 40). Auto only Allows Auto. Not that I'm complaining, it works fine.
One other thing, this build also locks up my WRT600N v1.1 if I change the Wireless mode of the 5GHz (from N-only to NA-only in this case). When it locks up the USB light comes on.
Posted: Sat Feb 21, 2009 14:22 Post subject: WRT600N v1.1 5ghz speeds
I posted in the 11650 thread that I thought these latest builds we OK regarding wireless speeds. What I have found although, is that it is significantly degraded over build 11580 for example. My settings: w|1 40 mhz channel 149 NA-only WPA2-Personal, 84 mw tx power. I have tried different channels to no avail. Speed right now is 81 mbs where I was getting consistent 162-216 mbs and sometimes 243 from the exact same location. Signal strength says low right now and I am approx 35 feet from the router with one interior wall between. macgyver mentioned this back in the thread....
Anyway, now all that needs to happen is to add the security lights to utils.c. _________________ WRT54G v3 - v24 r14471M NEWD Eko - AP
WRT350N v1.0
WRT600N v1.1 - halfway there!
Se7en is Darker...