Joined: 23 Aug 2009 Posts: 51 Location: Livonia, MI, USA
Posted: Sun Aug 23, 2009 21:50 Post subject: wrt54gs v7 help
i made a jtag and im able to backup/flash the router but it seems to keep restarting when i try to go to the web gui with the linksys firmware. iv tryed to flash the cfe firmware and try to tftp dd-wrt and the power light came on but nothing else and it keeps restarting from the looks of the pings.
is it possible someone could send me the wholeflash.bin for a wrt54gs v7 with dd-wrt?
Check the CFE collection thread for one for your router: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=25971 And why would you need to erase wholeflash did you hose your CFE somehow? _________________
ASUS AC3200
Linksys WRT32X
Linksys WRT3200 ACM
Joined: 23 Aug 2009 Posts: 51 Location: Livonia, MI, USA
Posted: Sun Aug 23, 2009 22:29 Post subject:
the router was bricked when i got it. i tryed the bsp and the management page and it worked but it just keeps resetting i dont know why. i am going to try to find a different cfe file
the router was bricked when i got it. i tryed the bsp and the management page and it worked but it just keeps resetting i dont know why. i am going to try to find a different cfe file
Joined: 23 Aug 2009 Posts: 51 Location: Livonia, MI, USA
Posted: Sun Aug 23, 2009 22:38 Post subject:
Mordak wrote:
kevin666 wrote:
the router was bricked when i got it. i tryed the bsp and the management page and it worked but it just keeps resetting i dont know why. i am going to try to find a different cfe file
the router was bricked when i got it. i tryed the bsp and the management page and it worked but it just keeps resetting i dont know why. i am going to try to find a different cfe file
The WRT54G v7 uses an Atheros AR2317 chip, has 2MB ROM, 8MB RAM and runs VxWorks. It is not supported by DD-WRT as the WRT54G v7 isn't Broadcom based. The WRT54G v7 will probably never be supported
_________________
ASUS AC3200
Linksys WRT32X
Linksys WRT3200 ACM
The WRT54G v7 uses an Atheros AR2317 chip, has 2MB ROM, 8MB RAM and runs VxWorks. It is not supported by DD-WRT as the WRT54G v7 isn't Broadcom based. The WRT54G v7 will probably never be supported
wrong again its a GS v7 not a g v7. its got a broadcom chip and a samsung chip. bcm5354 rev2. people on this forum have gotten it to work. for some reason mine keeps resetting though
The WRT54G v7 uses an Atheros AR2317 chip, has 2MB ROM, 8MB RAM and runs VxWorks. It is not supported by DD-WRT as the WRT54G v7 isn't Broadcom based. The WRT54G v7 will probably never be supported
wrong again its a GS v7 not a g v7. its got a broadcom chip and a samsung chip. bcm5354 rev2. people on this forum have gotten it to work. for some reason mine keeps resetting though
I guess that's good news for you then. Sorry again. Do you have a jtag cable by chance? And have you tried tftp and a 30/30/30 hard reset? _________________
ASUS AC3200
Linksys WRT32X
Linksys WRT3200 ACM
Joined: 23 Aug 2009 Posts: 51 Location: Livonia, MI, USA
Posted: Sun Aug 23, 2009 23:51 Post subject:
when i do tjtagv2.exe -flash:cfe /noemw it sits at erasing block: 1... i tryed to reset it and nothing. i was able to write the cfe over 10 times earlier i dont know what happened...