Private ip address
From DD-WRT Wiki
(Difference between revisions)
| Revision as of 19:50, 28 June 2012 (edit) Glenn (Talk | contribs) (chg) ← Previous diff |
Current revision (12:23, 1 July 2012) (edit) (undo) Glenn (Talk | contribs) m (Private LAN addresses moved to Private ip address) |
||
| (2 intermediate revisions not shown.) | |||
| Line 1: | Line 1: | ||
| Private internet addresses are often used on the LAN. | Private internet addresses are often used on the LAN. | ||
| - | The allowed private addresses are specified in [http://tools.ietf.org/html/rfc1918 rfc1918]: | + | The allowed private IPv4 addresses are specified in [http://tools.ietf.org/html/rfc1918 rfc1918]: |
| * 10.0.0.0 - 10.255.255.255 (10/8 prefix) | * 10.0.0.0 - 10.255.255.255 (10/8 prefix) | ||
| * 172.16.0.0 - 172.31.255.255 (172.16/12 prefix) | * 172.16.0.0 - 172.31.255.255 (172.16/12 prefix) | ||
| Line 7: | Line 7: | ||
| Note: Private ip addresses must be (source) translated ([[Network address translation|NAT]]ted, tcp, udp: PAT) to a public (=non-private) ip address (tcp: [[wikipedia:Internet_socket|socket]]) before its payload can be send into the (public) internet. | Note: Private ip addresses must be (source) translated ([[Network address translation|NAT]]ted, tcp, udp: PAT) to a public (=non-private) ip address (tcp: [[wikipedia:Internet_socket|socket]]) before its payload can be send into the (public) internet. | ||
| - | |||
| - | [[NAPT]] (network address and port translation) is a necessary because of to few public internet IPv4 addresses. NAPT is commonly referred to as NAT ([[Network address translation]]). | ||
| - | |||
| - | The NAPT is normally done by a router or firewall with NAPT functionalty. | ||
| ==External links== | ==External links== | ||
Current revision
Private internet addresses are often used on the LAN.
The allowed private IPv4 addresses are specified in rfc1918:
- 10.0.0.0 - 10.255.255.255 (10/8 prefix)
- 172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
- 192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
Note: Private ip addresses must be (source) translated (NATted, tcp, udp: PAT) to a public (=non-private) ip address (tcp: socket) before its payload can be send into the (public) internet.