Tony1044 DD-WRT Novice
Joined: 15 Feb 2017 Posts: 1
|
Posted: Wed Feb 15, 2017 9:30 Post subject: New to DD-WRT and could do with some guidance |
|
Hi all
Thanks for a brilliant piece of work! Amazing!
Apologies if this has been asked but I couldn't find anything on it (but in fairness I may not even be searching for the correct terms).
I have DD-WRT running on Hyper-V.
What I am really trying to achieve is to use it to route all of my internet traffic over NordVPN acting (I think) as a Bridge
My current setup is as follows:
]---- (WAN)[Sophos UTM](LAN)----Internal Network
The UTM does all of the PPoE Dialup, firewall, routing etc.
What I am trying to achieve is:
]---- (WAN)[Sophos UTM](LAN)----(WAN)DD-WRT(LAN)----Internal Network
So the idea is that internally, the UTM will continue to deliver DHCP addresses to clients, but instead of giving itself out as the default gateway, it'll give out the LAN address of the DD-WRT.
The DD-WRT will then route out, via the UTM, over NordVPN.
So far, I've managed to get the VPN link up but never seem to be able to see it or route over it.
Any help would be very much appreciated - networking isn't really my strong point!
This is a home environment, by the way, despite the UTM (it's the free Home version). |
|