Mega E3000 installed ok. Scripts still don't appear to run. Also, load seems high. All three load indicators are over 1.00.
telnet in and run top, what process is using up your cpu... I have tested scripts on startup with my N66U on this release and its working well..
More info needed
-Fractal
Router E3000
OTRW is not running for me and it seems to be related to the fact that the scripts are not running when my usb drive is mounted to /opt. Here is the output of top
1. "Reboot" doesn't seem to work from command line or gui.
2. Unbridged VAP (wl0.1) doesn't work with or without wireless security. Can't get to the internet.
Copying files from my network server to my laptop (download) maxes out at say 10MB/s but uploads can push 30MB/s. I've tried without security as well.
Switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N
and instantly I can copy at 25-30MB/s from the server.
Same on my config with two e4200v1.
Primary e4200v1: Accespoint 5GHz/40MHz, Gateway
Secondory e4200v1: WLAN Bridge to Primary e4200
(afterburner / frameburst on or off, no significant difference)
I got only 66-75Mbit in Downstream (100/6 MBit Cable)
If i switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N, i have full 100Mbit in Download. Why?
Copying files from my network server to my laptop (download) maxes out at say 10MB/s but uploads can push 30MB/s. I've tried without security as well.
Switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N
and instantly I can copy at 25-30MB/s from the server.
Same on my config with two e4200v1.
Primary e4200v1: Accespoint 5GHz/40MHz, Gateway
Secondory e4200v1: WLAN Bridge to Primary e4200
(afterburner / frameburst on or off, no significant difference)
I got only 66-75Mbit in Downstream (100/6 MBit Cable)
If i switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N, i have full 100Mbit in Download. Why?
I believe it is because tomato has the CTF module in the firmware and DDWRT doesn't have it.
Copying files from my network server to my laptop (download) maxes out at say 10MB/s but uploads can push 30MB/s. I've tried without security as well.
Switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N
and instantly I can copy at 25-30MB/s from the server.
Same on my config with two e4200v1.
Primary e4200v1: Accespoint 5GHz/40MHz, Gateway
Secondory e4200v1: WLAN Bridge to Primary e4200
(afterburner / frameburst on or off, no significant difference)
I got only 66-75Mbit in Downstream (100/6 MBit Cable)
If i switch to tomato-E4200USB-NVRAM60K-1.28.0500.5MIPSR2Toastman-RT-N, i have full 100Mbit in Download. Why?
Try changing tcp congestion control to westwood, and do some speed tests... let me know if that changes anything?
I ran 5 speed tests on each over wifi on a 100mb/s internet connection and took the average and displayed them here... Let me know if you find simular results.
I ran 5 speed tests on each over wifi on a 100mb/s internet connection and took the average and displayed them here... Let me know if you find simular results.
Ok, i will try, but i can't find the inital mini build for e4200. Where is it?
I ran 5 speed tests on each over wifi on a 100mb/s internet connection and took the average and displayed them here... Let me know if you find simular results.
Ok, i will try, but i can't find the inital mini build for e4200. Where is it?
You should not need an initial for the E4200, it has a large enough flash to flash std_usb_nas