cubalibre DD-WRT Novice
Joined: 25 Mar 2014 Posts: 14
|
Posted: Thu Nov 20, 2014 18:57 Post subject: wan wont get ip address from bridged dsl router |
|
Hi guys,
My x86 box wont get an ip on eth0. I tried connecting a PC directly to the bridged router and it got assigned my external internet address, so I guess the problem is with the eth0 adapter (intel 1000 pro).
Bridge router: Buffalo wmbr g300h (DD-WRT v24-sp2,Release: 11/11/14)
x64 box: (DD-WRT v24-sp2,Release: 11/11/14)
here is the dmesg results
Code: |
login as: root
DD-WRT v24-sp2 std (c) 2014 NewMedia-NET GmbH
Release: 11/11/14 (SVN revision: 25309)
root@192.168.4.3's password:
==========================================================
____ ___ __ ______ _____ ____ _ _
| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |
|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_
||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|
|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|
DD-WRT v24-sp2
http://www.dd-wrt.com
==========================================================
BusyBox v1.22.1 (2014-11-11 04:55:45 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
root@zalman:~# mseg
-sh: mseg: not found
root@zalman:~# dmesg
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 10, io mem 0xfbffc000
ata5.00: ATA-7: ST3250820A, 3.AAE, max UDMA/100
ata5.00: 488397168 sectors, multi 16: LBA48
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 10, io mem 0xfbffb000
ata5.00: configured for UDMA/100
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 10, io mem 0xfbffa000
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access ATA ST3250820A 3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
alg: skcipher: encryption failed on test 1 for ecb-aes-ccp: ret=19
alg: hash: digest failed on test 1 for cmac-aes-ccp: ret=19
alg: hash: digest failed on test 1 for sha1-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha1-ccp: ret=19
alg: hash: digest failed on test 1 for sha224-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha224-ccp: ret=19
alg: hash: digest failed on test 1 for sha256-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha256-ccp: ret=19
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
input device check on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
Waiting 5 sec before mounting root device...
usb 2-6: new high-speed USB device number 3 using ehci-pci
usb 2-6: New USB device found, idVendor=05e3, idProduct=070e
usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 2-6: Product: USB Storage
usb 2-6: SerialNumber: 000000009601
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-6:1.0
usb 6-2: new full-speed USB device number 2 using ohci-pci
usb 6-2: New USB device found, idVendor=0403, idProduct=fc60
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: IRTrans USB
usb 6-2: Manufacturer: MConsult
usb 6-2: SerialNumber: MMUN0000
scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9601 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:1: Attached scsi generic sg2 type 0
sd 6:0:0:2: Attached scsi generic sg3 type 0
sd 6:0:0:3: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
List of all partitions:
0800 244198584 sda driver: sd
0801 4504 sda1 00000000-01
0802 65992 sda2 00000000-02
0803 33232 sda3 00000000-03
0804 1480 sda4 00000000-04
No filesystem could mount root, tried: squashfs
List of all partitions:
0800 244198584 sda driver: sd
0801 4504 sda1 00000000-01
0802 65992 sda2 00000000-02
0803 33232 sda3 00000000-03
0804 1480 sda4 00000000-04
No filesystem could mount root, tried: squashfs
List of all partitions:
0800 244198584 sda driver: sd
0801 4504 sda1 00000000-01
0802 65992 sda2 00000000-02
0803 33232 sda3 00000000-03
0804 1480 sda4 00000000-04
No filesystem could mount root, tried: squashfs
List of all partitions:
0800 244198584 sda driver: sd
0801 4504 sda1 00000000-01
0802 65992 sda2 00000000-02
0803 33232 sda3 00000000-03
0804 1480 sda4 00000000-04
No filesystem could mount root, tried: squashfs
VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
Freeing unused kernel memory: 340K (80728000 - 8077d000)
EXT2-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
it87: Found IT8712F chip at 0x290, revision 8
ACPI Warning: SystemIO range 0x00000295-0x00000296 conflicts with OpRegion 0x00000290-0x000002af (\_SB_.PCI0.SBRG.SIOR.ECRE) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x00000295-0x00000296 conflicts with OpRegion 0x00000290-0x000002af (\_SB_.PCI0.SBRG.ASOC.SIOE) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
pc87360: PC8736x not detected, module not inserted
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKE] BIOS reported IRQ 15, using IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e1000 0000:03:06.0 eth0: (PCI:33MHz:32-bit) 90:e2:ba:7f:7e:81
e1000 0000:03:06.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth1: RTL8168b/8111b at 0xfd354000, 48:5b:39:1b:5e:f5, XID 18000000 IRQ 10
r8169 0000:02:00.0 eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
8021q: adding VLAN 0 to HW filter on device eth0
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
device br0 entered promiscuous mode
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
device eth1 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
device eth0 entered promiscuous mode
random: dnsmasq urandom read with 78 bits of entropy available
device eth0 left promiscuous mode
8021q: adding VLAN 0 to HW filter on device eth0
r8169 0000:02:00.0 eth1: link up
br0: port 1(eth1) entered forwarding state
br0: port 1(eth1) entered forwarding state
br0: port 1(eth1) entered forwarding state
random: nonblocking pool is initialized
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
root@zalman:~#
|
Any help will be appreciated. |
|