wan wont get ip address from bridged dsl router

Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware
Author Message
cubalibre
DD-WRT Novice


Joined: 25 Mar 2014
Posts: 14

PostPosted: Thu Nov 20, 2014 18:57    Post subject: wan wont get ip address from bridged dsl router Reply with quote
Hi guys,
My x86 box wont get an ip on eth0. I tried connecting a PC directly to the bridged router and it got assigned my external internet address, so I guess the problem is with the eth0 adapter (intel 1000 pro).

Bridge router: Buffalo wmbr g300h (DD-WRT v24-sp2,Release: 11/11/14)
x64 box: (DD-WRT v24-sp2,Release: 11/11/14)

here is the dmesg results
Code:

login as: root
DD-WRT v24-sp2 std (c) 2014 NewMedia-NET GmbH
Release: 11/11/14 (SVN revision: 25309)
root@192.168.4.3's password:
==========================================================

 ____  ___    __        ______ _____         ____  _  _
 | _ \| _ \   \ \      / /  _ \_   _| __   _|___ \| || |
 || | || ||____\ \ /\ / /| |_) || |   \ \ / / __) | || |_
 ||_| ||_||_____\ V  V / |  _ < | |    \ V / / __/|__   _|
 |___/|___/      \_/\_/  |_| \_\|_|     \_/ |_____|  |_|

                       DD-WRT v24-sp2
                   http://www.dd-wrt.com

==========================================================


BusyBox v1.22.1 (2014-11-11 04:55:45 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@zalman:~# mseg
-sh: mseg: not found
root@zalman:~# dmesg
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 10, io mem 0xfbffc000
ata5.00: ATA-7: ST3250820A, 3.AAE, max UDMA/100
ata5.00: 488397168 sectors, multi 16: LBA48
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 10, io mem 0xfbffb000
ata5.00: configured for UDMA/100
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 10, io mem 0xfbffa000
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access     ATA      ST3250820A       3.AA PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 4:0:0:0: [sda] Attached SCSI disk
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.14.23 ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
Warning! fusbh200_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
4Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
usbcore: registered new interface driver vub300
usbcore: registered new interface driver ushc
sdhci-pltfm: SDHCI platform and OF driver helper
alg: skcipher: encryption failed on test 1 for ecb-aes-ccp: ret=19
alg: hash: digest failed on test 1 for cmac-aes-ccp: ret=19
alg: hash: digest failed on test 1 for sha1-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha1-ccp: ret=19
alg: hash: digest failed on test 1 for sha224-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha224-ccp: ret=19
alg: hash: digest failed on test 1 for sha256-ccp: ret=19
alg: hash: digest failed on test 1 for hmac-sha256-ccp: ret=19
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability NOT on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
    Performance counters on
    input device check on
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
xt_time: kernel timezone is -0000
ip_set: protocol 6
gre: GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
Waiting 5 sec before mounting root device...
usb 2-6: new high-speed USB device number 3 using ehci-pci
usb 2-6: New USB device found, idVendor=05e3, idProduct=070e
usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 2-6: Product: USB Storage
usb 2-6: SerialNumber: 000000009601
usb-storage 2-6:1.0: USB Mass Storage device detected
scsi6 : usb-storage 2-6:1.0
usb 6-2: new full-speed USB device number 2 using ohci-pci
usb 6-2: New USB device found, idVendor=0403, idProduct=fc60
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: IRTrans USB
usb 6-2: Manufacturer: MConsult
usb 6-2: SerialNumber: MMUN0000
scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9601 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9601 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access     Generic  STORAGE DEVICE   9601 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access     Generic  STORAGE DEVICE   9601 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:1: Attached scsi generic sg2 type 0
sd 6:0:0:2: Attached scsi generic sg3 type 0
sd 6:0:0:3: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Attached SCSI removable disk
sd 6:0:0:2: [sdd] Attached SCSI removable disk
sd 6:0:0:3: [sde] Attached SCSI removable disk
List of all partitions:
0800       244198584 sda  driver: sd
  0801            4504 sda1 00000000-01
  0802           65992 sda2 00000000-02
  0803           33232 sda3 00000000-03
  0804            1480 sda4 00000000-04
No filesystem could mount root, tried:  squashfs
List of all partitions:
0800       244198584 sda  driver: sd
  0801            4504 sda1 00000000-01
  0802           65992 sda2 00000000-02
  0803           33232 sda3 00000000-03
  0804            1480 sda4 00000000-04
No filesystem could mount root, tried:  squashfs
List of all partitions:
0800       244198584 sda  driver: sd
  0801            4504 sda1 00000000-01
  0802           65992 sda2 00000000-02
  0803           33232 sda3 00000000-03
  0804            1480 sda4 00000000-04
No filesystem could mount root, tried:  squashfs
List of all partitions:
0800       244198584 sda  driver: sd
  0801            4504 sda1 00000000-01
  0802           65992 sda2 00000000-02
  0803           33232 sda3 00000000-03
  0804            1480 sda4 00000000-04
No filesystem could mount root, tried:  squashfs
VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
Freeing unused kernel memory: 340K (80728000 - 8077d000)
EXT2-fs (sda3): warning: mounting unchecked fs, running e2fsck is recommended
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
it87: Found IT8712F chip at 0x290, revision 8
ACPI Warning: SystemIO range 0x00000295-0x00000296 conflicts with OpRegion 0x00000290-0x000002af (\_SB_.PCI0.SBRG.SIOR.ECRE) (20131218/utaddress-258)
ACPI Warning: SystemIO range 0x00000295-0x00000296 conflicts with OpRegion 0x00000290-0x000002af (\_SB_.PCI0.SBRG.ASOC.SIOE) (20131218/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
pc87360: PC8736x not detected, module not inserted
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt Link [LNKE] BIOS reported IRQ 15, using IRQ 11
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e1000 0000:03:06.0 eth0: (PCI:33MHz:32-bit) 90:e2:ba:7f:7e:81
e1000 0000:03:06.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth1: RTL8168b/8111b at 0xfd354000, 48:5b:39:1b:5e:f5, XID 18000000 IRQ 10
r8169 0000:02:00.0 eth1: jumbo features [frames: 4080 bytes, tx checksumming: ko]
8021q: adding VLAN 0 to HW filter on device eth0
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
device br0 entered promiscuous mode
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
device eth1 entered promiscuous mode
device br0 left promiscuous mode
device br0 entered promiscuous mode
device br0 left promiscuous mode
device eth0 entered promiscuous mode
random: dnsmasq urandom read with 78 bits of entropy available
device eth0 left promiscuous mode
8021q: adding VLAN 0 to HW filter on device eth0
r8169 0000:02:00.0 eth1: link up
br0: port 1(eth1) entered forwarding state
br0: port 1(eth1) entered forwarding state
br0: port 1(eth1) entered forwarding state
random: nonblocking pool is initialized
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
root@zalman:~#


Any help will be appreciated.
Sponsor
cubalibre
DD-WRT Novice


Joined: 25 Mar 2014
Posts: 14

PostPosted: Fri Nov 21, 2014 4:32    Post subject: Reply with quote
Everything is working now. Changing the network card to a different pci slot fixed the problem.
GLO
DD-WRT User


Joined: 19 Dec 2006
Posts: 204

PostPosted: Wed Dec 24, 2014 23:12    Post subject: Reply with quote
How is the firmware running now?

Is the ADSL component running smoothly with the release you have?

Merry Christmas and thanks in advance.
cubalibre
DD-WRT Novice


Joined: 25 Mar 2014
Posts: 14

PostPosted: Thu Dec 25, 2014 8:06    Post subject: Reply with quote
Hi,
I am running now firmware DD-WRT v24-sp2 (11/20/14) std
on the X86 router.

Everything is very smooth.

Merry Christmas to you too! -)
GLO
DD-WRT User


Joined: 19 Dec 2006
Posts: 204

PostPosted: Fri Dec 26, 2014 7:50    Post subject: Reply with quote
thanks,

Are you still using the WMBR-g300H as the modem?

Im tempted to flash it?
cubalibre
DD-WRT Novice


Joined: 25 Mar 2014
Posts: 14

PostPosted: Fri Dec 26, 2014 7:56    Post subject: Reply with quote
Yes, same modem.
Although the modem does a fine job routing itself, I have noticed better performance ( in torrents and vpn) with the current setup .
GLO
DD-WRT User


Joined: 19 Dec 2006
Posts: 204

PostPosted: Fri Dec 26, 2014 10:16    Post subject: Reply with quote
thanks again,

When you are using it in Bridge mode, do you lose the Gigabit ports on the Buffalo?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> X86 based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum