mg828 DD-WRT Novice
Joined: 06 Jan 2016 Posts: 3
|
Posted: Thu Jan 07, 2016 0:05 Post subject: Assistance with Atheros AR9485 |
|
Hello all, I sure could use a bit of help here. I recently purchased dd-wrt x86 professional specifically for the wifi capabilities. Considering the card works fine on Kali Linux, ubuntu, ect. I figured I wouldnt have a problem at all..Boy was i wrong. Basically the card (AR5B125/AR9485 chipset)seems to be recognized just fine but Im getting absolutely nothing out of it in client or AP mode. Heres some output that may be of use helping narrow down this problem.
Thanks very much in advance!
DD-WRT v3.0
lspci
04:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (re v 01)
lsmod | grep ath
ath10k_pci 27672 0
ath10k_core 246103 1 ath10k_pci
ath9k 87888 0
ath9k_common 33077 1 ath9k
ath9k_hw 334663 2 ath9k,ath9k_common
ath 15597 4 ath10k_core,ath9k,ath9k_common,ath9k_hw
mac80211 317872 3 ath10k_core,ath9k,ath9k_hw
cfg80211 217840 5 ath10k_core,ath9k,ath9k_common,ath,mac80211
compat 11189 6 ath10k_pci,ath10k_core,ath9k,ath9k_common,mac80211,cfg80211
ath_pci 234518 0
ath_hal 205121 1 ath_pci
iwconfig ath0
ath0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off |
|
mg828 DD-WRT Novice
Joined: 06 Jan 2016 Posts: 3
|
Posted: Thu Jan 07, 2016 18:10 Post subject: |
|
Ive been looking at the output of the commands above in other distros in hopes of narrowing down the problem. The ath10k_pci & ath10k_core is what stands out but despite my endless googling on how to disable or black list them Ive come up with nothing. It seems that modprobe.d is missing from dd-wrt x86 and thats what most, if not all, support points to. Help me out here guys.. Im doing my best to figure this out myself to no avail. Help me out? |
|