This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 32597_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
_________________ [I prefer answere in whole sentence]
Posted: Sat Jul 08, 2017 14:44 Post subject: Netgear R7000
Router: Netgear R7000
Firmware:r32597 (30 040 064 bytes)
Previous: r32170
Kernel: Linux 4.4.76 #1654 SMP Sat Jul 8 11:30:46
Temp/Load: CPU 66.9 °C / WL0 48.5 °C / WL1 49.5 °C / 0.13, 0.06, 0.01 (3%)
Reset: First try, I usually like it dirty, so I didn't reset when I flashed. DD-WRT didn't start the web interface properly (Browser complained about the new cert, as usual. But no response from web server after making the exception) Accessible via telnet. Did a soft reboot.
After first soft reboot: Browser stuck trying to load web interface. Logged in via telnet and did nvram erase + soft reboot
After soft reboot: Up and running, no issues yet. (Uptime 44min)
So this release needs you to nvram erase in order to work properly. _________________
R6800 BS K4.4 r46329 (Main router)
WNDR3700v3 r40009 (WAP)
--- Spares ---
R7500 Stock FW (Found it at the city dump alongside a EX7000)
WNDR4300 BS K3.18 r40559 (Flaky ethernet ports)
R7000 BS K4.4 r40750 (Dead ethernet ports, cooked to death in the attic a really hot summers day, about 105-110C)
WNDR4000 BS K3.10 r31899 (Loaned out to tenant who lives in my old home)
WNR2000v2 BS K2.6 r39230 (bricks and giggles)
+ A bunch of WRT54GL:s
I use my routers with pretty basic configuration. Only having WiFi + BT coexist enabled.
I don't have any USB devices connected.
Router: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r32597 std (07/08/17)
Previous: DD-WRT v3.0-r31924
Kernel: Linux 4.4.76 #1654 SMP Sat Jul 8 11:30:46 CEST 2017 armv7l
Status: Working
Reset: Yes via Web GUI reset to defaults
Errors: None so far
Temperatures on the CPU, WL0 and WL1 have dropped with the CPU dropping by almost 8C.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Sat Jul 08, 2017 17:05 Post subject:
Router: Linky E3000
Firmware: DD-WRT v3.0-r32597 mega (07/08/17)
Previous: DD-WRT v3.0-r32464 mega (nightly)
Kernel: Linux 3.10.107 #15032 Sat Jul 8 11:26:16 CEST 2017 mips
Status: Working
Reset: YES
Errors: GUI Stops responding randomly - cleared NVRAM started fresh. We'll see if it continues normal operation....but for now it's working. And...it hasn't updated NTP time (10 minutes)...I'll report back if it ever does.
[EDIT]
Nope...Still GUI issues...reverting to 32464 nightly again...
Bad build as far as I'm concerned.
redhawk _________________ The only stupid question....is the unasked one.
Router: Netgear R7000
Firmware: DD-WRT v3.0-r32597 (07/08/17)
Previous: DD-WRT v3.0-r32170
Kernel: Linux 4.4.76 #1654 SMP Sat Jul 8 11:30:46 CEST 2017 armv7l
Status: Working
Reset: No
Errors: None other than my openvpn not starting automatically at boot and having to kill ebtables but these problems have been consistent in the previous builds and once you iron them out on reboot your rock solid until the next build.
As for Smasks comment above about erasing the nvram you just have to start rebooting the router before firmware updates.
Router: Linky E3000
Firmware: DD-WRT v3.0-r32597 mega (07/08/17)
Previous: DD-WRT v3.0-r32464 mega (nightly)
Kernel: Linux 3.10.107 #15032 Sat Jul 8 11:26:16 CEST 2017 mips
Status: Working
Reset: YES
Errors: GUI Stops responding randomly - cleared NVRAM started fresh. We'll see if it continues normal operation....but for now it's working. And...it hasn't updated NTP time (10 minutes)...I'll report back if it ever does.
[EDIT]
Nope...Still GUI issues...reverting to 32464 nightly again...
Bad build as far as I'm concerned.
redhawk
Cannot confirm. For me it works fine. But I only use it as switch/AP.
Later edit: Yes, I can confirm it for my E4200 V1. It seems that having WiFi clients produces this trouble. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Router: TP-Link AC1900 - Archer C9 v1.0
Firmware: DD-WRT v3.0-r32597 std (07/08/17)
Previous: 03-21-2017-r31722
Kernel: Linux 4.4.76 #1656 SMP Sat Jul 8 11:47:05 CEST 2017 armv7l
Status: Working
Reset: No
Errors: None so far
I am, as well, having the GUI issues with my N66U. My access points are fine, but when I log into the router and move between tabs in the software, the router locks me out. I have to manually reboot (Cut Power) to get back to the GUI, and that does not correct the issue.
I am, as well, having the GUI issues with my N66U. My access points are fine, but when I log into the router and move between tabs in the software, the router locks me out. I have to manually reboot (Cut Power) to get back to the GUI, and that does not correct the issue.
Make the picture smaller please. _________________ I am far from a guru, I'm barely a novice.
Router: Linksys E2000
Firmware: DD-WRT v3.0-r32597 mega
Previous: DD-WRT v3.0-r32170 mega
Kernel: Linux 3.10.107 #15028 Sat Jul 8 11:23:12 CEST 2017 mips
Status: Working
Reset: Yes
Errors: Occasionally when logged into the routers GUI it will suddenly not allow me to access any page/tab and times out. A reboot is the only way to get back to the GUI. The router will still respond and serve up web pages as normal while this happens. _________________ All we wanna do is eat your brains.
Netgear WNDR3700v3
Linksys e2000
