Kong's new build DD-WRT v3.0-r32700M kongac 15/07/2017

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4  Next
Author Message
colnago
DD-WRT User


Joined: 23 Oct 2014
Posts: 98

PostPosted: Sun Jul 16, 2017 1:18    Post subject: Reply with quote
Router Model DLink DIR890l
Firmware Version DD-WRT v3.0-r32700M kongac (07/15/17)
reset: yes

Kong mentioned he fixed the ifconfig path in the test build. OpenVPN is now working. Thank you.
Sponsor
JAMESMTL
DD-WRT Guru


Joined: 13 Mar 2014
Posts: 856
Location: Montreal, QC

PostPosted: Sun Jul 16, 2017 2:08    Post subject: Reply with quote
Hi Kong,

Primary router is a straight up linux box, normal speedtests results are 942/112 (upload is throttled at 112 of 114 for QOS)

On v32270-TEST MD5 ec3aca668726b168153e1074ac789f60
Upgrade via ddup followed by hard reset (10 sec reset button). Only config was username + password

R7000 DHCP (Double Nat off primary router)
789 - 840 (Download) / 112 (Upload)
*** Note R7000 usually hard crashes during upload (Requires power cycle)

R7000 PPPOE (via switch for vlan 35 tagging -> Optical Network Terminal)
Approx 720 (Download) / 114 (Upload)
**** Note R7000 usually hard crashes during upload (requires poer cycle)

Unfortunately I don't have a serial wired into this router so no crash logs.
<Kong>
DD-WRT Guru


Joined: 15 Dec 2010
Posts: 4339
Location: Germany

PostPosted: Sun Jul 16, 2017 6:38    Post subject: Reply with quote
Trd64 wrote:
Router: Netgear R7000
Firmware: latest
Previous: DD-WRT v3.0-r32170M kongac (06/11/17)
Kernel: latest
Status: OpenVPN doesn't route
Reset: yes
Errors: no errors

At first, I did not reset the router; it wouldn't let me log into router wirelessly after upgrading and I had to use one of the four wired ports to be able to log into the router. I reflashed and reset the defaults to see if it would fix any of the problems I described above. Again, I had to use one of the wired ports to be able reset the router password to be able to log into it wirelessly. After upgrading Kong firmware, openvpn does not connect have to roll back to 6/11/17 to get it to work.


For the last couple of builds, it sets the factory wireless password, after reset or nvram corruption:-) Thus password as written on the box is used for wireless.

_________________
KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
al_bo
DD-WRT User


Joined: 22 Dec 2015
Posts: 63

PostPosted: Sun Jul 16, 2017 8:22    Post subject: Reply with quote
So. Is there GUI locks on this build or not? There is just need to nvram clear and there no bricks... Can some one confirm that this build with out GUI crash?
colnago
DD-WRT User


Joined: 23 Oct 2014
Posts: 98

PostPosted: Sun Jul 16, 2017 9:05    Post subject: Reply with quote
No crashes for me, but only ~8 hours.

I thought OpenVPN client was working after the path change re-uploaded version, but it was just connecting. As Trd64 mentioned, it seems to be routing everything out to the web and not through the VPN.
Ah-Pin-Kor
DD-WRT User


Joined: 19 Sep 2015
Posts: 267

PostPosted: Sun Jul 16, 2017 10:24    Post subject: Reply with quote
Router Model: Dlink-DIR890L
Firmware Version: DD-WRT v3.0-r32700M kongac (07/15/17)
Kernel Version: Linux 4.4.76 #355 SMP Sat Jul 15 22:23:40 CEST 2017 armv7l
Status: OK
Reset: no at first, then yes
Previous: 32170M

Coming from 32170M, didn't reset and couldn't see wl2 tabs in the webgui, even though could connect to it. Reset back to factory defaults and wl2 is seen in the webgui again.

_________________

Netgear R7800 kongpro 19.07 20190919 || Netgear R7000 36070M kongac (Client Bridge=5GHz, AP=2.4GHz with bridged VAP)
Linksys WRT32X davidc502 OpenWrt || Linksys WRT1200ACv1 Gargoyle 1.11.x
Linksys WRT1900ACSv2 dd-wrt 39956
ddaniel51
DD-WRT Guru


Joined: 19 Feb 2013
Posts: 1464

PostPosted: Sun Jul 16, 2017 10:51    Post subject: Reply with quote
Ah-Pin-Kor wrote:
Router Model: Dlink-DIR890L

Coming from 32170M, didn't reset and couldn't see wl2 tabs in the webgui, even though could connect to it. Reset back to factory defaults and wl2 is seen in the webgui again.


Same here on R8500.

_________________
Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Sun Jul 16, 2017 12:41    Post subject: Reply with quote
OK...So no one else is seeing GUI lockup. I decided to reflash just the R6300v2 for now. Reset to defaults and reconfigured again...now I can't duplicate the lockup.

I do still have NTP update issues. Setup as AP on the 2.4GHz and CB on the 5GHz radio connecting to my host unit...the Time/Day never updates. It seems that only the WAN connected radio will get NTP time/date correctly with these newer builds...like I said..BS builds have the same problem since nightly 32464.

Other than this issue...the radio seems to be working correctly for me.

redhawk

_________________
The only stupid question....is the unasked one.
james1795
DD-WRT User


Joined: 11 Jan 2011
Posts: 160

PostPosted: Sun Jul 16, 2017 14:18    Post subject: R8000 Reply with quote
Flashed R8000 weird results. Flashed it yesterday and let it run and when I woke up this morning I couldn't connect to the wifi. I just restarted the router and then I flash it again doing a reset. Hopefully it will be stable but if it does it again I will revert to last month firmware.
Ava Pug
DD-WRT Novice


Joined: 17 Jun 2014
Posts: 15

PostPosted: Sun Jul 16, 2017 15:17    Post subject: Reply with quote
R7000 locking up with this build. Sticking with previous build for now.
al_bo
DD-WRT User


Joined: 22 Dec 2015
Posts: 63

PostPosted: Sun Jul 16, 2017 16:18    Post subject: Reply with quote
Ava Pug wrote:
R7000 locking up with this build. Sticking with previous build for now.

The same thing. R7000 hands up. No internet, no wifi, no GUI. I have to power up circle to roll back to 32170 build. Before and after flash from 32170 to 32700 I was done erase nvram via telnet but still R7000 hands up.
djid10t
DD-WRT Novice


Joined: 10 Mar 2016
Posts: 1

PostPosted: Sun Jul 16, 2017 18:07    Post subject: Reply with quote
al_bo wrote:
Ava Pug wrote:
R7000 locking up with this build. Sticking with previous build for now.

The same thing. R7000 hands up. No internet, no wifi, no GUI. I have to power up circle to roll back to 32170 build. Before and after flash from 32170 to 32700 I was done erase nvram via telnet but still R7000 hands up.


R7000 no issues for me. Flashed from 32170, no reset, running QoS and openVPN.
jimfree
DD-WRT User


Joined: 26 Apr 2011
Posts: 203
Location: Sacramento CA

PostPosted: Sun Jul 16, 2017 18:28    Post subject: Reply with quote
Router Netgear R6300V2
Previous: DD-WRT v3.0-r32170M kongac (06/11/17)
Firmware DD-WRT v3.0-r32700M kongac (07/15/17)
Kernel Linux 4.4.76 #355 SMP Sat Jul 15 22:23:40 CEST 2017 armv7l
Reset No
Update via DDUP

Only noted issue was router locked up a few minutes after intial reboot. Powered down and restarted and all has been fine since, current up time @ 14 hours.

Features used and working
Both 2.4G and 5G radios, currently 7 2.4G and 5 5G devices connected.
SSH
DHCP w/approx 20 reserved IPs, not all connected at same time.
2 USB drives, one 32Gb thumb drive (fat32), one 4Tb drive on USB 3 port Ext4, two partions (opt and jffs).
SAMBA
miniDLNA
Lighttpd Webserver
ftp server
port fowarding

I can't speak to the speed "boost" as I'm stuck on 15Mb DSL. Initial impression is everything I use is working up to par. Thanks again to BS and Kong.

Edit: It did eventually lock up again as others have noted. I stopped the sfe process as kong reported that some problems still existed with fixes in the pipeline.


Last edited by jimfree on Tue Jul 18, 2017 2:13; edited 1 time in total
diogosena
DD-WRT User


Joined: 11 Jun 2011
Posts: 50

PostPosted: Mon Jul 17, 2017 3:26    Post subject: Reply with quote
I'm seeing freezes when torrenting, previous versions was fine.

upgrade via ddup
model ac68u
zetagi74
DD-WRT Novice


Joined: 15 Sep 2016
Posts: 3

PostPosted: Mon Jul 17, 2017 4:39    Post subject: Re: Kong's new build DD-WRT v3.0-r32700M kongac 15/07/2017 Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r32700M kongac (07/15/17)
Previous: DD-WRT v3.0-r32170M kongac (06/11/17)
Kernel: Linux 4.4.76 #355 SMP Sat Jul 15 22:23:40 CEST 2017 armv7l
Status: ok
Reset: no
Errors: no errors
Goto page Previous  1, 2, 3, 4  Next Display posts from previous:    Page 2 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum