Author
Message
WildBill91 DD-WRT Novice Joined: 11 Nov 2017 Posts: 2
Posted: Sat Nov 11, 2017 1:51 Post subject: Looking for stable QOS build for Asus RT-AC87U
I'm currently using build 30731 and i'm getting spats of bloat on dslreports just about every other test. Trying to find a build that is stable with QOS as well as stability in general. Residential setup on a bridged NVG599 running in passthrough mode to the asus. Any help would be greatly appreciated.
Thanks.
Back to top
Sponsor
Per Yngve Berg DD-WRT Guru Joined: 13 Aug 2013 Posts: 6872 Location: Romerike, Norway
Posted: Sat Nov 11, 2017 8:48 Post subject:
Port: WAN
Packet Scheduler: HFSC
Queueing Discipline: FQ_CODEL
Downlink (kbps): 27648
Uplink (kbps): 27648
This is for a 30Mbit/s Internet link. Set it to 80%
Work with Build 33555 and 33006, but you have to disable SFE
The QOS does not throttle IPv6 traffic
Back to top
egc DD-WRT Guru Joined: 18 Mar 2014 Posts: 12922 Location: Netherlands
Posted: Sat Nov 11, 2017 9:24 Post subject:
@Quarkysg has made a patched SFE which maybe works with QOS, I have not tested it my self for QOS, I have tested it to work with Policy based routing though.
See: https://www.dd-wrt.com/phpBB2/viewtopic.php?t=311872
and https://www.dd-wrt.com/phpBB2/viewtopic.php?t=312127&highlight= for the latest module _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read): https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Back to top
WildBill91 DD-WRT Novice Joined: 11 Nov 2017 Posts: 2
Posted: Sun Nov 12, 2017 3:55 Post subject:
How would one go about disabling SFE? or is that a feature i can toggle on and off in 33555 or 33006? Thanks!
Per Yngve Berg wrote: Port: WAN
Packet Scheduler: HFSC
Queueing Discipline: FQ_CODEL
Downlink (kbps): 27648
Uplink (kbps): 27648
This is for a 30Mbit/s Internet link. Set it to 80%
Work with Build 33555 and 33006, but you have to disable SFE
The QOS does not throttle IPv6 traffic
Back to top
Per Yngve Berg DD-WRT Guru Joined: 13 Aug 2013 Posts: 6872 Location: Romerike, Norway
Posted: Sun Nov 12, 2017 8:22 Post subject:
SFE can be disabled in the GUI where you configute the WAN connection.
Back to top