fish008 DD-WRT Novice
Joined: 23 Dec 2017 Posts: 1
|
Posted: Sat Dec 23, 2017 23:09 Post subject: Repeater Bridge Packet Loss |
|
Hi,
Interested in if anyone has any suggestions on how to address a problem I'm having.
I have a Netcomm R7000 and I'm trying to set it up as a repeater bridge, to a Netcomm Cable modem.
I can get the bridge to sort of work, but get lots of packet loss approx 40%, might get 30 pings with no errors then a set of 20 pings that fail. no real pattern to the packet loss.
Interestingly if I ping the GW at the same time, there is Zero packet loss. So it's only when I try to ping out to the internet. If I ping the internet from the GW no problems.
Setup is 2.4Ghz Repeater Bridge, using same subnet, IP assigned by GW. 5Ghz radio disabled.
Things i've tried
- All sorts of setup options following different guides to set up.
- Different wireless options N-only, mixed, NG mixed, A B etc
- Different dd-wrt versions, from 2014, all the way to the latest Nov Kong build
- Played with using different channels, transmit power etc
None of this makes ANY difference, exactly the same behaviour.
any ideas of other things to try??
thanks |
|